|
1. |
Uninstall
the
controller
from the
Reliadens
controller
panel.
|
|
2. |
Set the
controller
on a
clean
table,
face
down.
|
|
3. |
Warning:
Be
careful
to
protect
the
screen
from
scratching.
|
|
4. |
Remove
the four
screws
(2 on
each
side)
and open
the
cover
carefully.
|
|
5. |
Note :
You can
unplug
the 50
pin
cable
for
easier
access.
|
|
6. |
Replace
the used
battery
with the
new one.
|
|
7. |
Re-plug
50 pin
cable,
replace
cover
and re
install
controller
into
controller
box. |
